Skip To Content
Factory Conversions
Vans & more
Opel, vans, factory conversions

Our factory conversions

Fit for purpose

Solutions for your business directly from Opel

Wide variety of specialist body conversions
Comprehensive three year/100,000 mile warranty
Adaptable for niche user requirements

Movano Tipper

The Movano Tipper features a five-stage chrome-plated underfloor ram and 50° tip angle. The tipping mechanism employs a high-performance, 2kW electro-hydraulic power pack which can be easily operated by one person, using hand-held controls on a wander lead.

 

  • Two load lengths (L2, L3)
  • Two GVWs (3.5 or 4,5 tonne)
  • Front-wheel drive, rear-wheel drive or heavy-duty twin rear-wheel drive
  • Chassis Cab or Crew Cab models
  • Payload of up to 1122kg on 3.5 tonne models

 

Features* include:

 

  • Tipper platform width 2040mm, length up to 3205mm
  • Steel platform and front panel, powder-coated in dark grey
  • Cab protection including ladder frame
  • Remote tipping control with cab-mounted, spiral wander lead
  • Side under-run bars
  • Top and bottom hinged tailboard
  • Double-skinned removable anodised aluminium side- and tailboards
  • Gantry lugs for ladder restraint
  • 'Tipper in action' warning buzzer
  • Power pack isolation switch
  • Standard half-height toolbox (L3 tippers)
  • Protection grilles for rear light units (optional)
Configure your tipper

Movano Dropside

The Dropside conversion extends Movano's in-built flexibility. The flat load platform has a load length of up to 4470mm, low loading height and zero wheel arch intrusion, plus it features load restraint lashing eyes and an anti-slip resin finish.

 

  • Three load lengths (L2, L3, L4)
  • Two GVWs (3.5 or 4.5 tonne)
  • Front-wheel drive, rear-wheel drive or heavy-duty twin rear-wheel drive
  • Chassis Cab or Crew Cab models
  • Payload of up to 1462kg on 3.5 tonne models

 

Features* include:

 

  • Steal load platform with resin-coated wooden floor
  • Load platform width 2040mm
  • 400mm high, removable, double-skinned, anodized aluminium side- and tailboards
  • Removable rear posts
  • Recessed, retractable lashing eyes in deck perimeter
  • Side under-run bars
  • Cab protection including ladder frame
  • Protection grilles for rear light units (optional)
  • Rear ladder frame and toolbox (optional)
Configure your dropside

Movano Box Van

Offering up to 22 cubic metres of cargo volume, the Movano Box Van easily carries a huge load. Inside, the strong yet lightweight body features a completely flat, slip-resistant load floor, accessible via twin 270° opening doors.

 

  • Three load lengths (L3, L4)
  • Two GVWs (3.5 or 4.5 tonne)
  • Front-wheel drive, rear-wheel drive or heavy-duty twin rear-wheel drive
  • Payload of up to 1212kg for 3.5 tonne and 1893kg for 4.5 tonne models

 

Features* include:

 

  • Aluminium frame with smooth finished polyester walls and doors
  • Transculent roof
  • Anti-slip floor
  • Plywood load area lining
  • Loadspace length up to 4580mm
  • Loadspace with 2150mm
  • Interior height 2200mm
  • Twin 270° opening doors
  • Luton head (optional)
  • Wind deflector (optional)
Configure your box Van

Contact your local dealer

Cars
Vans
Experience Opel
About Opel

Feature descriptions and illustrations may refer to or show optional equipment not included in standard delivery. The information contained was accurate at the time of publishing. We reserve the right to make changes in design and equipment. The colors shown are approximate actual colors, only. Illustrated optional equipment is available at extra charge. Availability, technical features and equipment provided on our vehicles can vary or may only be available in certain countries or may be available at extra costs, only. For precise information on the equipment provided on our vehicles, please contact your local Opel dealer.

* The fuel consumption and CO2 emissions figures mentioned comply with the WLTP test procedure, on the basis of which new vehicles are type approved from 1 September 2018. This WLTP procedure replaces the European drive cycle (NEDC), which was the test procedure used previously. Due to more realistic test conditions, the fuel consumption and CO2 emissions measured under the WLTP are, in many cases, higher compared to those measured under the NEDC. The fuel consumption and CO2 emissions figures may vary depending on actual conditions of use and on different factors such as: specific equipment, options and format of tires. Please contact your dealer for further information. For more information on WLTP click here https://www.wltpfacts.eu/.

** The fuel consumption and CO2 emissions figures mentioned are determined according to the new test procedure WLTP and the relevant values are translated back into NEDC to allow the comparability with other vehicles. Please contact your dealer for the latest information. The values do not take into account in particular use and driving conditions, equipment or options and may vary depending on the format of tires. For more information on official fuel consumption and CO2 emission values, please read the guideline "Guideline for fuel consumption, CO2 emissions of new passenger cars" freely available in all point of sales.

*** The range and electric consumption figures mentioned comply with the WLTP test procedure, on the basis of which new vehicles are type approved from 1 September 2018. They may vary depending on actual conditions of use and on different factors such as: speed, thermal comfort on board the vehicle, driving style, vehicle load and outside temperature. The charging time depends in particular on the power of the charger on board the vehicle, the charging cable and the type and power of the charging station used. Please contact your dealer for further information. For more information on WLTP click here https://www.wltpfacts.eu/.

**** The fuel consumption, CO2 emissions and range figures mentioned comply with the WLTP test procedure, on the basis of which new vehicles are type approved from 1 September 2018. This WLTP procedure replaces the European drive cycle (NEDC), which was the test procedure used previously. Due to more realistic test conditions, the fuel consumption and CO2 emissions measured under the WLTP are, in many cases, higher compared to those measured under the NEDC. The fuel consumption, CO2 emissions and range figures may vary depending on actual conditions of use and on different factors such as: charging frequency, driving style, speed, specific equipment, options, format of tires, outside temperature and thermal comfort on board the vehicle. Please contact your dealer for further information. For more information on WLTP click here https://www.wltpfacts.eu/.

Please note: All information was accurate and up to date at the time of publication. Opel reserves the right to alter specifications at any time, which may affect the data shown. All figures quoted relate to the EU base model with standard equipment.